Saturday 17th of November 2018

Home Forthcoming Events
Forthcoming Events PDF Print E-mail
Written by Kamoutsi Eleni   
Thursday, 13 January 2011 18:09

 

6ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών


7-9 Δεκεμβρίου 2016, Επιστημονικό και Τεχνολογικό Πάρκο Ηπείρου


http://www.met.gr/conference/view/19



EUROMAT 2017


From September 17 to 22, Thessaloniki, Greece



http://euromat2017.fems.eu/




JUNIOR EUROMAT 2016: Materials  Science – A whole value chain approach

From July 10 to 14, 2016, EPFL, Lausanne Switzerland 


JUNIOR  EUROMAT,  the  main  event  for  young  materials  scientist  and  engineers  in  Europe  will  take  place  again  at     the  banks  of  the  Lake  of  Geneva,  this time at EPFL in  Lausanne Switzerland from July 10 to 14, 2016



http://junior-euromat.org/





5ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών

21-22 Νοέμβριου , 2013, Πανεπιστήμιο Θεσσαλίας, Βόλος

Τα μεταλλικά υλικά, ο χάλυβας, το αλουμίνιο και τα άλλα μεταλλικά κράματα, καθώς και οι κατεργασίες τους αποτε-λούσαν παραδοσιακά, και αποτελούν ακόμα, το βασικό ιστό της ελληνικής βιομηχανίας.
Στην ιδιαίτερα δύσκολη και κρίσιμη καμπή που ευρίσκεται η Ελλάδα, το συνέδριο έχει ως στόχο την προβολή των ερευ-νητικών δραστηριοτήτων που πραγματοποιούνται στη χώρα μας, κυρίως από νέους ερευνητές, καθώς και τη διάχυση των αποτελεσμάτων της έρευνας στον επιχειρηματικό κλά-δο των μεταλλικών υλικών. Τα θέματα του συνεδρίου εστιά-ζονται στις σύγχρονες τάσεις της μεταλλουργικής έρευνας, δίνοντας ιδιαίτερη έμφαση στις εφαρμογές.
Το συνέδριο αποτελεί το 5ο της σειράς των συνεδρίων της Ελληνικής Μεταλλουργικής Εταιρείας (ΕΜΕ). Το 5ο Πανελλήνιο Συνέδριο θα πραγματοποιηθεί στο Βόλο στις 21-22 Νοεμβρίου 2013. Το συνέδριο διοργανώνεται από την ΕΜΕ και το Εργαστήριο Υλικών του Τμήματος Μηχανολόγων Μηχανικών του Πανεπιστημίου Θεσσαλίας.
Link


5th Pan Hellenic Conference on Metallic Materials

November 21-22, 2013

UNIVERSITY OF THESSALY, Rooftile and Brickworks Museum N. & S. Tsalapatas, Volos.

Link


ICEAF III   26-28 June 2013, Kos, Greece

3rd International Conference on Engineering Against Fracture

The scope of the conference is to attract interdisciplinary work in the areas of design and prevention of fracture. Works are expected to cover a number of different technological areas including aeronautics, land transportation, marine, power, bioengineering etc

Link


9th THE “A” Coatings •  the 4th ICMEN and • the 7th BalkanTrib International Conferences

October 2-3-4,  2011 •  Thessaloniki, Greece


THE “A” Coatings Conference represents the mutual effort of four academic Institutions:

  • The Laboratory for Machine Tools and Manufacturing Engineering (EEΔΜ), Aristoteles University of Thessaloniki
  • The Institute for Production Engineering and Machine Tools (IFW), University of Hannover
  • Τhe Laboratory for Manufacturing Technology (LFT), University of Erlangen-Nuremberg
  • Τhe Institute of Surface Engineering (IOT), RWTH  Aachen University

to establish an international forum, concerning coatings applications in the field of production technique, embracing the state of the art and the future trends in coatings research and development. The Surface Engineering Institute (IOT) joined the Conference Organizers’ group in 2010.


The International Conference on Manufacturing Engineering was established during the Hellenic Chairmanship of EUREKA 2001-2002 (www.eureka.be), attaining in strengthening synergies between people involved in scientific research and those having to meet the rapidly increasing demands of industrial applications.


The International Conference BalkanTrib is supported by the Balkan Tribological Association. This conference is organized every three years, since 1993, in various Balkan Countries. The conference aims at the collaboration stimulation between Balkan and other countries for developing innovative products and services.

Link


TMS 2011 Annual Meeting & Exhibition

February 27 - March 3, 2011 •  San Diego, California

Materials science and engineering professionals hailing from more than 68 countries will gather at the San Diego Convention Center to network, present research, share industrial applications and introduce innovation. This blend of academic, technical, business and social elements creates the perfect synergy to move research and development forward to produce applications that fuel global solutions.

Link


AeroMat 2011 Conference and Exposition May 23-26, 2011, Long Beach, California USA

The Leading Materials Conference and Exposition for Aerospace Materials Engineers, Structural Engineers and Designers. Every year, AeroMat brings together hundreds of delegates and exhibiting companies to discuss and display the latest advances in materials and processes for aerospace applications.

Link


ICEAF II   22-24 June 2011, Mykonos, Greece

2nd International Conference on Engineering Against Fracture

The scope of the conference is to attract interdisciplinary work in the areas of design and prevention of fracture. Works are expected to cover a number of different technological areas including aeronautics, land transportation, marine, power, bioengineering etc

Link


Euromat 2011  12-15 September 2011, Montpellier, France

Euromat 2011 will aim at giving emphasis to the link between Materials Science and its applications, between academic research and industry.

The Euromat 2011 Conference will be jointly organized by two FEMS member societies: Société Française de Métallurgie et de Matériaux (SF2M) and the Associazione Italiana di Metallurgia (AIM).

Link



Last Updated on Sunday, 20 March 2016 18:33